Application of atomic-scale mechanistic insights into carbon-catalyzed N2O reduction for kinetic modeling construction.

To achieve the collaborative elimination of N2O and carbon of potent greenhouse pollutants from automotive mobile sources, a chemical kinetic model is developed to accurately track the heterogeneous process of carbon-catalyzed N2O reduction based on density functional theory, with experimental data used to validate the model's reliability. The influence of carbon structure, site density, and surface chemical properties on N2O catalytic reduction can be analyzed within this system. Results reveal that the free-edge site of carbon accurately describes the catalytic reduction process of N2O. Adsorption of N2O to carbon edges in O-down, N-down, or parallel orientations exhibits an exothermic process with energy barriers. The N2O with O-down reduction pathway predominates due to the limitations imposed by the unitary carbon site. As the number of active carbon atoms at carbon edges increases, the N2O reaction mode tends towards parallel and N-down pathways, resulting in a significant enhancement of N2O conversion rates and a reduction in catalytic temperatures, with the lowest achievable temperature being 300 K. Furthermore, the triplet carbon structure exhibits higher efficiency in N2O catalytic reduction compared to the singlet carbon structure, achieving a remarkable N2O conversion rate of 93.8 % within the typical temperature exhaust window of diesel engines. This study supplies a breakthrough for carbon materials as catalysts for achieving high N2O conversion rates at low cost, which is important for the collaborative catalytic elimination of N2O and carbon black pollutants.

A facile one step route that introduces functionality to polymer powders for laser sintering.

Laser Sintering (LS) is a type of Additive Manufacturing (AM) exploiting laser processing of polymeric particles to produce 3D objects. Because of its ease of processability and thermo-physical properties, polyamide-12 (PA-12) represents ~95% of the polymeric materials used in LS. This constrains the functionality of the items produced, including limited available colours. Moreover, PA-12 objects tend to biofoul in wet environments. Therefore, a key challenge is to develop an inexpensive route to introduce desirable functionality to PA-12. We report a facile, clean, and scalable approach to modification of PA-12, exploiting supercritical carbon dioxide (scCO2) and free radical polymerizations to yield functionalised PA-12 materials. These can be easily printed using commercial apparatus. We demonstrate the potential by creating coloured PA-12 materials and show that the same approach can be utilized to create anti-biofouling objects. Our approach to functionalise materials could open significant new applications for AM.

Water bridges as the trigger in an amino functionalized Zn-MOF for highly selective and sensitive fluorescent sensing of water.

Water is a fundamental element for life. The highly selective and sensitive sensing of water is always attractive for mankind in activities such as physiological processes study and extraterrestrial life exploration. Fluorescent MOFs with precise channels and functional groups might specifically recognize water molecules with hydrogen-bond interaction or coordination effects and work as water sensors. As a proof of concept, herein, an amino functionalized Zn-MOF (named as complex 1) with pores that just right for water molecules to form hydrogen bond bridges is revealed for highly selective and sensitive fluorescent sensing of water. The single-crystal X-ray diffraction analysis indicates that the 3D framework of complex 1 is functionalized with free amino groups in the channels. Hydrogen bonds formed in the channel along b-axis as water bridges to connect two adjacent NH2bdc ligands and result in the restriction of intramolecular motions (RIM) which could responsible for the selective turn-on fluorescence response to water. Complex 1 exhibits high sensitive to trace amount of water in organic solvents and could be used for water detection in a wide range water contents. Take advantages of complex 1, portable sensors (complex 1@PMMA) were prepared and used in the highly sensitive water sensing.

Polysaccharide hydrogel containing silver nanoparticle@catechol microspheres with photothermal, antibacterial and anti-inflammatory activities for infected-wounds repair.

Anti-infection hydrogels have recently aroused enormous attraction, particularly in the treatment of chronic wounds. Herein, silver nanoparticle@catechol formaldehyde resin microspheres (Ag@CFRs) were fabricated by one-step hydrothermal method and subsequently encapsulated in hydrogels which were developed by Schiff base reaction between aldehyde groups in oxidized hyaluronic acid and amino groups in carboxymethyl chitosan. The developed polysaccharide hydrogel exhibited microporous structure, high swelling capacity, favorable mechanical strength, enhanced tissue adhesion and photothermal activities. Additionally, the hydrogel not only ensured long-term and high-efficiency antibacterial performance (99.9 %) toward E. coli and S. aureus, but also realized superior cytocompatibility in vitro. Moreover, based on the triple antibacterial strategies endowed by chitosan, silver nanoparticles and the photothermal properties of catechol microspheres, the composite hydrogel exhibited excellent anti-infection function, significantly downregulated inflammatory factors (TNF-α and IL-1ß) and promoted in vivo infected-wound healing. These results demonstrated that the polysaccharide hydrogel containing Ag@CFRs has great potential for infected-wounds repair.

Perioperative immune checkpoint blockades improve prognosis of resectable non-small cell lung cancer.

OBJECTIVES: Immune checkpoint blockades (ICB) have been proven to improve prognosis of non-small cell lung cancer in the neoadjuvant setting, while whether its perioperative use could bring extra benefit remained unidentified. We aimed to demonstrate the prognostic benefit of perioperative ICB over preoperative-only use and investigate who could benefit from this 'sandwich ICB therapy'. METHODS: Patients undergoing neoadjuvant therapy followed by surgery from 2018 to 2022 were retrospectively reviewed, and were divided into 4 groups based on the perioperative regimens: pre-ICB + post-computed tomography (CT), pre-ICB-only, pre-CT + post-ICB and pre-CT-only. Treatment-related adverse events, surgical outcomes, therapeutic response, recurrence-free survival and overall survival were compared. RESULTS: Of 214 enrolled patients with preoperative therapy, 108 underwent immunochemotherapy and 106 underwent platinum-based chemotherapy. Compared with preoperative chemotherapy, preoperative immunochemotherapy was demonstrated with significantly higher major pathologic response (57/108 vs 12/106) and pathologic complete response (35/108 vs 4/106) rates with comparable adverse events. Regarding survival, perioperative ICB significantly improved the recurrence-free survival [versus pre-CT-only hazard ratio (HR) 0.15; 95% CI 0.09-0.27; versus pre-ICB-only HR 0.36; 95% CI 0.15-0.88] and overall survival (versus pre-CT-only HR 0.24; 95% CI 0.08-0.68). In patients without major pathologic response, perioperative ICB was observed to decrease the risk of recurrence (HR 0.31; 95% CI 0.11-0.83) compared with preoperative ICB, and was an independent prognostic factor (P < 0.05) for recurrence-free survival. CONCLUSIONS: Perioperative ICB showed promising efficacy in improving pathological response and survival outcomes of resectable non-small cell lung cancer. For patients without major pathologic response after resection followed by preoperative ICB, sequential ICB treatment could be considered.

Solubilization and structural changes of lignin in naked oat stems during subcritical water autohydrolysis.

In this study, the solubilization and structural changes of lignin in naked oat stems were investigated under subcritical water autohydrolysis systems (170-210 °C, 0.68-1.85 MPa). In this system, Hemicellulose was preferentially hydrolyzed in the liquid water at elevated temperatures, leading to the production of acetic acid and glucuronic acid, which acidified the reaction system. Under acidic and high-temperature conditions, lignin primarily underwent degradation and condensation reactions. At autohydrolysis temperatures below 190 °C and autohydrolysis pressures below 1.22 MPa, lignin degradation was predominant, realizing a maximum lignin removal of 47.8 % and breakage of numerous ß-O-4 bonds from lignin. At autohydrolysis temperatures above 190 °C and autohydrolysis pressures above 1.22 MPa, lignin condensation dominated, with an increase in the amount of organic acids generated upon hemicellulose degradation, leading to condensation reactions with the degraded low-molecular-weight lignin. The degree of lignin condensation was positively correlated with the temperature of the reaction system. This study provides essential insights into the dynamic changes in the structure of lignin in both the hydrolysis residue and hydrolysis solution during subcritical water autohydrolysis.

Effect of stereo-complexation on crystallization behavior and barrier properties of poly-lactide.

The unique stere-complex crystal formed by poly(ʟ-lactide)/poly(ᴅ-lactide) (PLLA/PDLA) has a significant impact on properties of poly-lactide materials and is considered an effective means to improve the barrier properties of poly-lactide (PLA). In this work, poly-lactide films with different aggregate structures were prepared and the relationship of aggregate structure and barrier properties were explored. The results show that the crystal structure including crystallinity and crystal forms can be controlled by adjusting the isothermal crystallization time and crystallization temperature during the molding process. PLLA/PDLA composite films contain both homochiral crystallites and stereo-complex crystallites, and there is a synergistic crystallization effect between the two of them, which provides the composite films with high crystallinity and excellent barrier properties. Compared to the PLLA with homochiral crystallites, the PLLA/PDLA composite film with only stereo-complex crystallites exhibits higher barrier properties. The linear correlation between the crystallinity and the barrier properties is weak due to the changes in crystallization behavior and then the structure of poly-lactide caused by stereo-complexation. The linear correlation between the crystallinity and the barrier properties of the blend film is strong in the low crystallinity but weak at high crystallinity. Compared to homochiral crystallites, stereo-complex crystallites exhibits lower crystallinity dependence. It has been proven that different crystal forms have different design ideas for preparing high-barrier films, but the stereo-complexation resulting from the intermolecular forces between PLLA and PDLA having complementary chemical structure, is an effective method for enhancing the barrier performances of poly-lactide sustainably.

Achieving Record External Quantum Efficiency of 11.5% in Solution-Processable Deep-Blue Organic Light-Emitting Diodes Utilizing Hot Exciton Mechanism.

High performance solution-processable deep-blue emitters with a Commission International de l'Eclairage (CIE) coordinate of CIEy ≤ 0.08 are highly desired in ultrahigh-definition display. Although, deep-blue materials with hybridized local and charge-transfer (HLCT) excited-state feature are promising candidates, their rigidity and planar molecular structures limit their application in solution-processing technique. Herein, four novel deep-blue solution-processable HLCT emitters were first proposed by attaching rigid imide aliphatic rings as functional units onto the HLCT emitting core. The functional units not only improve solubility, enhance thermal properties and morphological stability of the emitting core, but also promote photoluminescence efficiency, balance charge carrier transport, and inhibit aggregation-caused quenching effect due to the weak electron-withdrawing property as well as steric hindrance. The corresponding solution-processable organic light-emitting diodes (OLEDs) substantiate an unprecedented maximum external quantum efficiency (EQEmax) of 11.5% with an emission peak at 456 nm and excellent colour purity (full width at half maximum = 56 nm and CIEy = 0.09). These efficiencies represent the state-of-the-art device performance among the solution-processable blue OLEDs based on the "hot exciton" mechanism. This simple strategy opens up a new avenue for designing highly efficient solution-processable deep-blue organic luminescent materials.

Untargeted metabolomics yields insight into extramammary Paget's disease mechanisms.

Background: Extramammary Paget's disease (EMPD) is a rare cutaneous malignancy, commonly affecting the external genitalia and perianal area of the elderly with unclear pathogenesis. Metabolomics provides a novel perspective for uncovering the metabolic mechanisms of a verity of cancers. Materials and methods: Here, we explored the metabolome of EMPD using an untargeted strategy. In order to further investigate the potential relationship between metabolites and gene expression, we re-analyzed the gene expression microarray data (GSE117285) using differential expression analysis and functional enrichment analyses. Results: Results showed that a total of 896 metabolites were identified and 87 metabolites including 37 upregulated and 50 downregulated significantly in EMPD were sought out. In the following feature selection analyses, four metabolites, namely, cyclopentyl fentanyl-d5, LPI 17:0, guanosine-3',5'-cyclic monophosphate, kynurenine (KYN, high in EMPD) were identified by both random forest and support vector machine analyses. We then identified 1,079 dysfunctional genes: 646 upregulated and 433 downregulated in EMPD. Specifically, the tryptophan-degrading enzyme including indoleamine-2,3-dioxygenase-1 (IDO1) and tryptophan 2,3-dioxygenase (TDO2) were also increased. Generally, cancers exhibit a high expression of IDO1 and TDO2 to catabolize tryptophan, generating abundant KYN. Moreover, we also noticed the abnormal activation of sustaining proliferative signaling in EMPD. Conclusion: In conclusion, this study was the first to reveal the metabolome profile of EMPD. Our results demonstrate that IDO1/TDO2-initialized KYN metabolic pathway may play a vital role in the development and progression of EMPD, which may serve as a potential therapeutic target for treating EMPD.

Potentiating the radiation-induced type I interferon antitumoral immune response by ATM inhibition in pancreatic cancer.

Radiotherapy induces a type I interferon-mediated (T1IFN-mediated) antitumoral immune response that we hypothesized could be potentiated by a first-in-class ataxia telangiectasia mutated (ATM) inhibitor, leading to enhanced innate immune signaling, T1IFN expression, and sensitization to immunotherapy in pancreatic cancer. We evaluated the effects of AZD1390 or a structurally related compound, AZD0156, on innate immune signaling and found that both inhibitors enhanced radiation-induced T1IFN expression via the POLIII/RIG-I/MAVS pathway. In immunocompetent syngeneic mouse models of pancreatic cancer, ATM inhibitor enhanced radiation-induced antitumoral immune responses and sensitized tumors to anti-PD-L1, producing immunogenic memory and durable tumor control. Therapeutic responses were associated with increased intratumoral CD8+ T cell frequency and effector function. Tumor control was dependent on CD8+ T cells, as therapeutic efficacy was blunted in CD8+ T cell-depleted mice. Adaptive immune responses to combination therapy provided systemic control of contralateral tumors outside of the radiation field. Taken together, we show that a clinical candidate ATM inhibitor enhances radiation-induced T1IFN, leading to both innate and subsequent adaptive antitumoral immune responses and sensitization of otherwise resistant pancreatic cancer to immunotherapy.

Achieving high molecular weight alternating copolymers of 1-octene with methyl acrylate via Lewis acid catalyzed copolymerization.

The radical (co)polymerization of long-chain α-olefins (C4+) to produce high molecular weight (Mw) polymers is of great importance. However, this process is currently faced with significant challenges due to the presence of less reactive allylic radicals during radical (co)polymerization, leading to oligomers or polymers with extremely low Mw (less than 1 × 104 g mol-1). Using copolymerization of 1-octene with methyl acrylate (MA) as a proof-of-concept for addressing this challenge, we present a feasible method for synthesizing high Mw α-olefin copolymers via scandium trifluoromethanesulfonate (Sc(OTf)3)-mediated radical copolymerization. In this case, copolymers of 1-octene and MA (poly(1-octene-alt-MA)) with a Mw exceeding 3 × 104 g mol-1 were successfully synthesized in the presence of Sc(OTf)3. Meanwhile, the presence of alternating 1-octene-MA sequential structures was observed. To further enhance the Mw of poly(1-octene-alt-MA), a difunctional comonomer, 1,7-octadiene, was introduced to copolymerize with 1-octene and MA. The results indicate that the incorporation of difunctional comonomer leads to a significant increase in the Mw of the copolymers synthesized. The addition of 1 mol% of 1,7-octadiene resulted in a copolymer with a remarkably high Mw of up to 13.45 × 104 g mol-1 while still maintaining a high degree of the alternating 1-octene-MA sequence (41%). The influence of polymerization parameters on the molecular weight were also investigated. Increasing the monomer concentration, reducing the dosage of initiator, and lowering the polymerization temperature have been found to be advantageous in enhancing the molecular weight. This approach has also been successfully applied to the synthesis of high molecular weight alternating copolymers of other long-chain α-olefins, including 1-hexene, 1-decene and 1-tetradecane, with methyl acrylate. In summary, this study provides a feasible method for converting "less activated" α-olefins into high Mw olefin copolymers. This approach holds significant potential for the production of value-added polyolefins, thus offering promising prospects for future applications.

Multimedia Mercury Recovery from Coal-Fired Power Plants Utilizing N-Containing Conjugated Polymer Functionalized Fly Ash.

To recover multimedia mercury from coal-fired power plants, a novel N-containing conjugated polymer (polyaniline and polypyrrole) functionalized fly ash was prepared, which could continuously adsorb 99.2% of gaseous Hg0 at a high space velocity of 368,500 h-1 and nearly 100% of aqueous Hg2+ in the solution pH range of 2-12. The adsorption capacities of Hg0 and Hg2+ reach 1.62 and 101.36 mg/g, respectively. Such a kind of adsorbent has good environmental applicability, i.e. good resistance to coexisting O2/NO/SO2 and coexisting Na+/K+/Ca2+/Mg2+/SO42-. This adsorbent has very low specific resistances (6 × 106-5 × 109 Ω·cm) and thus can be easily collected by an electrostatic precipitator under low-voltage (0.1-0.8 kV). The Hg-saturated adsorbent can desorb almost 100% Hg under relatively low temperature (<250 °C). Characterization and theoretical calculations reveal that conjugated-N is the critical site for adsorbing both Hg0 and Hg2+ as well as activating chlorine. Gaseous Hg0 is oxidized and adsorbed in the form of HgXClX(ad), while aqueous Hg2+ is adsorbed to form a complex with conjugated-N, and parts of Hg2+ are reduced to Hg+ by conjugated-N. This adsorbent can be easily large-scale manufactured; thus, this novel solid waste functionalization method is promising to be applied in coal-fired power plants and other Hg-involving industrial scenes.

High lipoprotein(a) concentration is associated with moyamoya disease.

BACKGROUND: Moyamoya disease (MMD) has attracted the attention of scholars because of its rarity and unknown etiology. METHODS: Data for this study were sourced from the Second Affiliated Hospital of Nanchang University. Regression analyses were conducted to examine the association in Lipoprotein [Lp(a)] and MMD. R and IBM SPSS were conducted. RESULTS: A cohort comprising 1012 MMD patients and 2024 controls was established through the propensity score matching method. Compared with controls, MMD patients showed higher median Lp(a) concentrations [18.5 (9.6-37.8) mg/dL vs. 14.9 (7.8-30.5) mg/dL, P < 0.001]. The odds ratios and 95% confidence intervals for Lp(a) were calculated in three models: unadjusted model, model 1 (adjusted for body mass index and systolic blood pressure), and model 2 (adjusted for model 1 plus triglyceride, C-reactive protein, homocysteine, and low-density lipoprotein cholesterol). Results were [1.613 (1.299-2.002), P < 0.001], [1.598 (1.286-1.986), P < 0.001], and [1.661 (1.330-2.074), P < 0.001], respectively. Furthermore, age, sex, or hypertension status had nothing to do with this relationship. CONCLUSIONS: Positive relationship exists between Lp(a) and MMD.

Bidirectional-Reinforced Carbon Fiber/Polyether-Ether-Ketone Composite Thin-Walled Pipes via Pultrusion-Winding for On-Orbit Additive Manufacturing.

Benefitting from lightweight, high strength, long life, and green recyclability, continuous fiber reinforced thermoplastic composite (CFTPC) pipes have attracted extensive interest, especially in the on-orbit additive manufacturing of structural components. However, the preparation of CFTPC pipes remains challenging due to the on-orbit limited space and high processing temperature of thermoplastic resin. Here, we report an effective approach for high performance carbon fiber/polyether-ether-ketone (CF/PEEK) thin-walled pipes via bidirectional reinforcement using the pultrusion-winding technique. The continuous fabrication of thin-walled pipes can be achieved, but the limitation by the size of core mold is also broken. The compressive and shear performance of CF/PEEK pipes with different layer designs have been studied based on experiments and simulations. With the increase in axial prepreg tape layer, the resultant CF/PEEK pipes exhibit greatly improved axial compression strength. The finite element analysis indicates that the maximum axial stress is decreased due to the axial enhancement. The flexural strength is greatly proved with pultrusion-winding cycles. The simulation confirms that the circumferential strain is effectively reduced. The high performance of bidirectional reinforced CF/PEEK pipes and the facile controllability of this approach highlight their suitability for utilization in on-orbit manufacturing of large-scale structures.

Decoupling the effects of air temperature change on soil erosion in Northeast China.

Changes in the air temperature tend to indirectly affect soil erosion by influencing rainfall, vegetation growth, economic development, and agricultural activities. In this study, the partial least squares-structural equation model (PLS-SEM) was used to decouple the impacts of temperature change on soil erosion in Northeast China from 2001 to 2019, and the indirect effect of temperature change on the pathways of natural and socioeconomic factors was analyzed. The results showed that temperature increase in Northeast China caused an increase in soil erosion by increasing rainfall and promoting economic development. Under the pathway of natural factors, in spring, the promoting effect on soil erosion under the influence of temperature change on rainfall was greater than the inhibiting effect on soil erosion under by the influence of temperature change on vegetation. In summer, the opposite effect was observed. Under the pathway of natural factors, over time, the promoting effect of temperature increase on soil erosion increased by 22.7%. Under the pathway of socioeconomic factors, temperature change not only aggravated soil erosion by promoting economic development, but also indirectly increased investments in agriculture and water conservation by improving the economy, thus inhibiting soil erosion to a certain extent. Over time, the contribution of temperature change to soil erosion through socioeconomic pathway was reduced by 44.4%. When the pathway of natural factors is compared with that of socioeconomics factors, temperature change imposed a more notable effect on the change in soil erosion through the socioeconomic pathway, indicating that human activities are the driving factors with a greater effect on soil erosion. Based on this, reasonable human intervention is an important means to alleviate soil erosion aggravation caused by rising temperatures.

High-content screening of drug combinations of an mPGES-1 inhibitor in multicellular tumor spheroids leads to mechanistic insights into neuroblastoma chemoresistance.

High-throughput drug screening enables the discovery of new anticancer drugs. Although monolayer cell cultures are commonly used for screening, their limited complexity and translational efficiency require alternative models. Three-dimensional cell cultures, such as multicellular tumor spheroids (MCTS), mimic tumor architecture and offer promising opportunities for drug discovery. In this study, we developed a neuroblastoma MCTS model for high-content drug screening. We also aimed to decipher the mechanisms underlying synergistic drug combinations in this disease model. Several agents from different therapeutic categories and with different mechanisms of action were tested alone or in combination with selective inhibition of prostaglandin E2 by pharmacological inhibition of microsomal prostaglandin E synthase-1 (mPGES-1). After a systematic investigation of the sensitivity of individual agents and the effects of pairwise combinations, GFP-transfected MCTS were used in a confirmatory screen to validate the hits. Finally, inhibitory effects on multidrug resistance proteins were examined. In summary, we demonstrate how MCTS-based high-throughput drug screening has the potential to uncover effective drug combinations and provide insights into the mechanism of synergy between an mPGES-1 inhibitor and chemotherapeutic agents.

Goal-directed fluid therapy during post-resection phase in low central venous pressure assisted laparoscopic hepatectomy: a randomized controlled superiority trial.

PURPOSE: The purpose of this prospective single blinded randomized controlled trial was to find out whether goal-directed fluid therapy (GDFT) strategy in post-transection period in low central venous pressure (CVP) assisted laparoscopic hepatectomy (LH) has more benefit than traditional fluid strategy. METHODS: Between April 2020 and Dec 2021, patients who were scheduled for laparoscopic liver resection surgery were eligible to participate in the study. Patients were randomly divided into two groups: control group that received traditional fluid strategy in post-transection period in low CVP assisted laparoscopic hepatectomy and GDFT strategy group that received GDFT strategy in post-transection period. The primary outcome parameter is the incidence of postoperative complications. Secondary outcome parameters include perioperative clinical outcomes, postoperative clinical outcomes, length of hospital stay after surgery, postoperative lactic acid, fluids and vasoactive medications during the operation. RESULTS: A total of 159 patients in the control group and 160 patients in the GDFT were included. Two groups had no significant difference in the incidence of postoperative complications including pneumonia (P = 0.34), acute kidney injury (P = 0.72), hepatic insufficiency (P = 0.25), pleural effusion (P = 0.08) and seroperitoneum (P = 1.00), respectively. The amount of perioperative urine output is fewer in GDFT group than in the control group (P = 0.0354), while other perioperative variables and postoperative variables were comparable between two groups. CONCLUSIONS: The results show the implementation of GDFT strategy is not associated with fewer postoperative complications. GDFT strategy did not result in improved outcomes in low CVP-assisted laparoscopic hepatectomy.

Robotic Versus Thoracoscopic Sub-lobar Resection for Octogenarians with Clinical Stage IA Non-small Cell Lung Cancer: A Propensity Score-Matched Real-World Study.

BACKGROUND: Minimally invasive sub-lobectomy is sufficient in treating small early-stage non-small cell lung cancer (NSCLC). However, comparison of the feasibility and oncologic efficacy between robot-assisted thoracoscopic surgery (RATS) and video-assisted thoracoscopic surgery (VATS) in performing sub-lobectomy for early-stage NSCLC patients age 80 years or older is scarce. METHODS: Octogenarians with clinical stage IA NSCLC (tumor size, ≤ 2 cm) undergoing minimally invasive wedge resection or segmentectomy at Shanghai Chest Hospital from 2011 to 2020 were retrospectively reviewed from a prospectively maintained database. Propensity score-matching (PSM) with a RATS versus VATS ratio of 1:4 was performed. Perioperative and long-term outcomes were analyzed. RESULTS: The study identified 594 patients (48 RATS and 546 VATS patients), and PSM resulted in 45 cases in the RATS group and 180 cases in the VATS group. The RATS patients experienced less intraoperative bleeding (60 mL [interquartile range (IQR), 50-100 mL] vs. 80 mL [IQR, 50-100 mL]; P = 0.027) and a shorter postoperative hospital stay (4 days [IQR, 3-5 days] vs. 5 days [IQR, 4-6 days]; P = 0.041) than the VATS patients. The two surgical approaches were comparable concerning other perioperative outcomes and postoperative complications (20.00% vs. 26.11%; P = 0.396). Additionally, during a median follow-up period of 66 months, RATS and VATS achieved comparable 5-year overall survival (90.48% vs. 87.93%; P = 0.891), recurrence-free survival (83.37% vs. 83.18%; P = 0.782), and cumulative incidence of death. Further subgroup comparison also demonstrated comparable long-term outcomes between the two approaches. Finally, multivariate Cox analysis indicated that the surgical approach was not independently correlated with long-term outcomes. CONCLUSIONS: The RATS approach shortened the postoperative hospital stay, reduced intraoperative bleeding by a statistically notable but clinically insignificant amount, and achieved long-term outcomes comparable with VATS in performing sub-lobectomy for octogenarians with early-stage small NSCLC.

Effect of low concentration of sodium fluoride on osteogenic/odontogenic differentiation of human dental pulp cells / 口腔疾病防治

Objective@#To study the effect of low concentrations of sodium fluoride on the osteogenic/odontogenic differentiation of human dental pulp cells (hDPCs) in vitro.@*Methods@#This study was reviewed and approved by the Ethics Committee. hDPCs were cultured using a modified tissue explant technique in vitro. The effects of different concentrations of sodium fluoride on the proliferation of hDPCs were measured by methylthiazol tetrazolium (MTT) assay. Appropriate concentrations were added to the osteogenic/odontogenic differentiation induction medium, and the cells were induced in vitro. Alizarin red S staining was used to detect the osteoblastic/odontogenic differentiation ability of the cells, and the mRNA expression of the key differentiation factors was detected by RT-qPCR. Moreover, the expression of key molecules of endoplasmic reticulum stress (ERS) was detected by RT-qPCR and Western blot. The data were analyzed with the SPSS 18.0 software package.@*Results@#Low concentration of NaF (0.1 mmol/L) could stimulate cell proliferation in vitro, while a high concentration (5-10 mmol/L) could inhibit cell proliferation (P<0.05). According to the literature and the experimental data, 0.1 mmol/L NaF was selected as the following experimental concentration. The levels of alizarin red S staining were increased after NaF induction of mixed osteogenic/odontogenic differentiation in vitro. The mRNA expression levels of key molecules for osteogenic/odontogenic differentiation, dentin sialophosphoprotein (DSPP), bone sialoprotein (BSP) and osteocalcin (OCN), were increased (P<0.05). The mRNA levels of ERS markers (splicing x-box binding protein-1 (sXBP1), glucose-regulated protein 78 (GRP78) and activating transcription Factor 4 (ATF4) were increased in NaF-treated cells. The protein expression levels of key ER stress molecules (phosphorylated RNA-activated protein kinase-like ER-resident kinase (p-PERK), phosphorylated eukaryotic initiation factor-2α (p-eIF2α) and ATF4) were higher in NaF-treated cells.@*Conclusion@#A low concentration of NaF promotes the osteogenic/odontogenic differentiation of hDPCs and increases the level of ER stress.